Sanding Polymer Clay with Drywall Sandpaper Means Less Gouging
Video #43: Using drywall sandpaper for sanding polymer clay can actually cause less gouging.
More...
IN THIS POST: — drywall mesh sandpaper – sanding — smooth polymer clay — (Topics marked with an asterisk* are discussed in the Comments Section below).
I’m sure whoever invented this cool sandpaper product did not think it would end up being used to sand polymer clay jewelry. But I use it all the time and love it.
The open mesh concept of drywall sandpaper is much smoother than normal grit sandpaper and therefore, will not gouge your bead surface nearly as much. Give it a try sometime and you’ll see what I mean. You’ll find it in the drywall section of any hardware store in a variety of textures ranging from fine to course.
Transcript not available for this video.
Our goal is to translate these videos into as many languages as possible. If you are interested in helping with this initiative, then please do contact us and we will figure out a way to make it worth your while :)
Resource Links:
- Related Video: How To Sand Polymer Clay Beads Using Drywall Sandpaper
- Related Video: Sanding and Buffing Your Polymer Clay Is Worth It
- Related Video: How To Make Your Own Sanding Pads For Polymer Clay
- Related Video: Using Wet/Dry Sandpaper For Sanding Polymer Clay
- Related Article: Wet Sanding Polymer Clay Tutorial: Make Clay Jewelry and Beads Shine
- Amazon: 42 Pcs Wet Dry Sandpaper 120 to 3000 Grit Assortment **
Resources marked with a double ** asterisk are affiliate links. If you click on them and decide to buy something, we may receive some compensation. This does not affect the price you pay in any way. What it does do, however, is helps us to continue providing free videos for you, here at the PcT website. Using our links to purchase your tools and supplies, is always greatly appreciated.
Sponsored Ads & Special Promotions
Shareable Images
To share this full blog post anywhere on the web that allows links in comments, here's a shortened url to copy and paste...
>> https://mypct.ca/v43 <<
Want to chat about today’s post? That’s what the comment section below is for. Scroll Down… We’d love to hear from you!
Or... if you would like to request a topic for a future post, here is the link to do that… PcT Suggestion Box
Just curious…Wont I save time and $ if I start sanding with a 1200 grit sandpaper?
Or is the process from 320-1200 necessary?
@Reyna Castano: Hi Reyna, unfortunately no — in fact starting at 1200 would take a long time since it’s such a fine grit. It would be difficult to smooth fingerprints, for example, or take a very long time to do. The finer grits wear out quickly, too, so you’d actually waste money this way…
The best way to accomplish sanding is to do “the process”. At the very least start with a lower grit, then go up thru a couple higher ones. You don’t have to go all the way to 1200, but at least 600…to smooth-out your pieces. (But remember, you’ll get the best shine by doing the entire process.) Give it a try, and you’ll begin to see why it’s necessary. Have you watched Cindy’s sanding videos? Also, check out her article, Sand Your Polymer Clay Beads – Or Else.
I hope this helps. The best way to prove how well sanding works is to try it. You’ll see how the process takes your beads from OK to extraordinary!
Judy – Thank you so much for sharing your thoughts. It makes me happy to hear that the polymer clay short cuts I teach are working out for you. Yay!!!
Hi Cindy
Sorry I’m so late, have been very busy lately. I love the Polymer Clay Course videos! I have not yet had time to look at all the follow up bonus tutes you emailed. Love all the techniques… like the sandpaper and water, crayon tips and so many more.
I have a friend who likes to take shortcuts, but won’t spend the money to learn the real shortcuts like you are showing us. Anyway I love your videos. Can’t wait to watch the rest of them.
Judy Finch
You are very welcome Charles. Glad this was helpful.
Just want to say thank you; regarding dry wall mesh sand paper.
Patricia you didn’t do anything wrong, you just didn’t continue on with the smaller grit papers, so you just weren’t finished yet.
The drywall sandpaper is quite a coarse grit and is meant for removing a fair amount of material. After using it, you need to go to a 320 grit wet/dry sandpaper, then a 400 grit, a 600 grit, a 800 grit and a 1200 grit. The paper gets finer the higher the grit.
Each smaller grit removes the scratches made by the previous grit until the scratches are so fine you can’t see them any more.
There are several articles on sanding on this blog that would be good for you to read. You can click on the link by my name for another article or use “sanding” as the keyword word in the search box at the top of the page.
Appreciate all your efforts,, Thank you…
I watched your sanding video and re watched it while I was doing my first set of pc cabs, I didn’t notice until after I glazed that they were all covered in scratches. What did I do wrong? Thanks.
Drywall sand paper can be used wet or dry. I like to use it wet when sanding beads because the water unclogs the paper and it sands smoother.
If you put the Dremel in a vice and hold the bead on a bead wire with two hands, it is easier to keep it from ‘flying away’!
Does drywall sandpaper need to be “wet” before using like regular sandpaper?
If I want to use a Dremel to sand my beads, what is the easiest way to secure them while I am sanding so they don’t go flying into the ozone?
When you go to buy drywall mesh sandpaper at the hardware store, don’t confuse it with drywall mesh tape. They are completely different products. Don’t get the tape.
Cindy’s last blog post..Finishing Polymer Clay Beads with Future Floor Polish